Switching system 1-0-2

Three-way resistive contact switch that provides reliable and clear interruption of a three-phase circuit in an electrical installation. Suitable for mounting either directly on a panel with screws or on a standard 35 mm DIN mounting rail. Certified for use according to IEC/EN and UL standards. catalogue.lovatoelectric.com+1

Technical data:

Product code: GA016A-040A

Series: GA (Lovato Electric)

Number of bolts: 3 (3-sided) catalogue.lovatoelectric.com+1

Rated current (thermal in free air) IEC Ith: 16 A (GA016A variant) catalogue.lovatoelectric.com+1

Rated full load current AC21A/AC22A: 16 A (400/500/690 V) catalogue.lovatoelectric.com

Rated voltage (maximum operating voltage): up to 690 V AC (depending on version) Newark Electronics

Rated input-disconnection voltage (Ui): 1000 V AC catalogue.lovatoelectric.com

Rated impulse withstand (Uimp): 8 kV catalog.lovatoelectric.com

Mounting type: screw-mounted on a plate or 35 mm DIN rail catalogue.lovatoelectric.com

Terminal connection: M4 screw connection, bolt-lock (pillar type) catalogue.lovatoelectric.com

Wire cross-sections: min 0.75 mm² – max 16 mm² catalogue.lovatoelectric.com

Fastening tool: Phillips #2, tightening torque 1.8…2.0 Nm catalogue.lovatoelectric.com

Protection class: front IP20 catalogue.lovatoelectric.com

Communication standards: IEC/EN 60947-3, IEC/EN 60947-1, UL60947-4-1, CSA C22.2 n°60947-4-1 catalogue.lovatoelectric.com+1

Operating temperature range: –25 °C … +55 °C (operation) catalogue.lovatoelectric.com

Package quantity: 5 pieces per pack catalogue.lovatoelectric.com

EAN-13: 8013975177570 (GA016A variant) catalogue.lovatoelectric.com

Important points to note:

Although the data does not specify the exact current rating for the combined code GA016A-040A, the correct series corresponds to the GA016A rating (16 A) and the GA040A version (40 A) together. It is recommended to check the manufacturer's documentation to see which specific amps and version are suitable.

The product is intended for power plants, control panels and panels where clear disconnection and insulation on three phases is required.

Installation must be carried out by a qualified electrical person and comply with applicable national and local electrical safety requirements.