- Sku: V20-3-FS-275
- Barcode: 4742455000537
Surge arrester V20-3+FS-275 T2 275 V, TN-C
Product details
The V20-3+FS-275 is a Type 2 surge protective device (SPD) designed to protect electrical installations against overvoltages caused by switching and lightning impulses. The device is suitable for use in a TN-C network and is installed on a DIN rail in an electrical distribution board.
The surge protective device features pluggable modules, a visual status indicator, and a remote signaling output. This allows the operational or fault status of the device to be checked visually in the distribution board and, if necessary, enables the signal to be transmitted to a control or monitoring system.
Technical specifications
Model: V20-3+FS-275
Product code: V20-3-FS-275
EAN: 4742455000537
Product type: Surge protective device / SPD
SPD type: T2 / Type 2
Network system: TN-C
Pole/configuration type: 3+FS
Nominal voltage Un: 230 V AC
Maximum continuous operating voltage Uc: 275 V AC
Nominal discharge current In, 8/20 µs: 20 kA
Maximum discharge current Imax, 8/20 µs: 40 kA
Voltage protection level Up: ≤ 1.5 kV
Response time: ≤ 25 ns
Technology: Varistor-based voltage limiting
Modules: Pluggable replaceable modules
Status indicator: Green/Red
Remote signaling contact: Yes
Wire connection range: 2.5–25 mm²
Installation: DIN rail / 35 mm rail
Protection rating: IP20
Housing material: Thermoplastic
Operating temperature: –40…+85 °C
Standard: IEC/EN 61643-11
Package quantity: 1 pc
Suitable for, for example
Overvoltage protection for electrical distribution boards
Installations with a TN-C network system
Protection of domestic, commercial, and technical electrical installations
Protection of equipment against overvoltages caused by switching and lightning impulses
Situations where a T2 class 275 V surge protective device with remote signaling capability is required
We also recommend checking out: electrical distribution boards, DIN rail accessories, connection terminals, circuit breakers, and residual current devices.
Not sure if this surge protective device is suitable for your distribution board or solution? Write or call us — we will help you choose the right solution.
Have a question?

Surge arrester V20-3+FS-275 T2 275 V, TN-C

