BLUETTI portable power station AC70P 1000W 864Wh LiFePO4

The BLUETTI AC70P is a compact and capable portable power station suitable for home backup, summer houses, camper vans, camping, job sites, and for powering electrical devices in locations without a standard power grid. The device features an 864 Wh LiFePO₄ battery and a 1000 W pure sine wave inverter, which allows for the use of both electronics and many standard 230 V electrical appliances.

The AC70P supports Power Lifting mode, which allows for the use of devices with up to 2000 W of power for certain resistive loads. This is useful, for example, for electric kettles, hair dryers, or electric heaters. The device's actual continuous nominal power, however, is 1000 W.

The power station can be charged from a 230 V power grid, solar panels, or a car's 12/24 V socket. With up to 950 W Turbo Charging, the battery reaches 80% charge in approximately 45 minutes.

Technical specifications

• Manufacturer: BLUETTI
• Model: AC70P
• Product type: portable power station
• Battery capacity: 864 Wh
• Battery type: LiFePO₄ (LFP)
• Battery lifespan: over 3000 charging cycles to 80% of original capacity
• Continuous AC output power: 1000 W
• Power Lifting mode: up to 2000 W
• Inverter peak power: 1500 W
• Inverter: pure sine wave
• AC output: 230 V
• Battery management: BMS
• Solar charge controller: MPPT
• UPS function: yes
• UPS switchover time: up to 20 ms
• Pass-through charging: yes
• Control via BLUETTI app: yes
• Dimensions: 314 × 209.5 × 255.8 mm
• Weight: approximately 10.7 kg
• Charging temperature: 0...+40 °C
• Discharging temperature: –20...+40 °C
• Warranty: 5 years

Outputs

The AC70P has a total of 8 different outputs, which can be used to power or charge multiple devices simultaneously.

• 2 × 230 V AC sockets
• Total AC output power: 1000 W
• 2 × USB-C, up to 100 W per port
• 2 × USB-A, 5 V / 2.4 A per port
• 1 × 12 V / 10 A car socket-type DC output
• 1 × wireless charging pad, up to 15 W
• AC output: pure sine wave

Two 100 W USB-C ports are especially practical for charging laptops, phones, tablets, and other USB-C Power Delivery devices.

Fast charging – up to 950 W

The BLUETTI AC70P supports up to 950 W Turbo Charging. According to the manufacturer, the battery reaches 0–80% in approximately 45 minutes. A full charge takes approximately 1.5–2 hours depending on the charging mode.

Charging options:

• from 230 V power grid
• with solar panels
• from a car's 12 V or 24 V socket
• from a generator
• from a compatible LiFePO₄ battery

The AC70P also allows for simultaneous charging and powering of devices.

Up to 500 W of solar panels

The built-in MPPT controller allows you to connect up to 500 W of solar panels to the power station.

• Maximum PV input: 500 W
• Input voltage: 12–58 V DC
• Maximum input current: 10 A
• Charging time with 500 W solar panels in ideal conditions: approximately 2.2–2.7 hours

This makes the AC70P a great solution for a summer house, camper van, camping, or other off-grid locations, where the power station can be recharged with solar energy during the day.

NB! When choosing solar panels, in addition to total power, you must also consider the panel array's voltage and current to ensure they remain within the AC70P's allowed PV input limits.

LiFePO₄ battery – over 3000 charging cycles

The AC70P uses a LiFePO₄ or lithium iron phosphate battery. According to BLUETTI data, the battery retains at least 80% of its original capacity after more than 3000 charging cycles.

The built-in BMS or battery management system monitors the operation of the battery and power station and helps protect the system from unsuitable operating conditions.

For long-term storage, the manufacturer recommends keeping the battery charge at approximately 40–60% and recharging it every 3–6 months.

UPS backup power

The BLUETTI AC70P can also be used as a UPS backup power source. In the event of a power grid failure, the switchover to battery power occurs in up to 20 milliseconds, according to the manufacturer.

It is suitable for, for example:

• backup power for internet routers and network equipment
• powering a computer and monitor
• security and communication devices
• home automation
• LED lighting
• keeping smaller electrical devices running during power outages

For very sensitive devices, however, the specific device's allowed UPS switchover time should be verified.

Suitable for, for example

• home backup power
• power outage situations
• summer houses and country homes
• camper vans and caravans
• camping
• boats
• job sites
• using smaller power tools
• temporary refrigeration
• backup power for routers and internet equipment
• powering televisions and other electronics
• LED lighting
• charging phones and tablets
• charging laptops
• charging cameras and drones
• as part of an off-grid electrical solution with solar panels

How long does the 864 Wh battery power devices?

The nominal battery capacity is 864 Wh, but when using 230 V devices, not all energy is usable without losses – some is consumed by the inverter and the power station's own electronics. Therefore, the actual operating time depends on the load, temperature, and usage conditions.

As an estimate, you can expect that 10 W LED lighting could work for over 70 hours, a 50 W device for about 14–15 hours, a 100 W device for about 7–8 hours, a 300 W load for approximately 2–2.5 hours, and a 500 W device for about 1.4 hours.

These are calculated examples, not manufacturer-guaranteed operating times.

1000 W and 2000 W – what is the difference?

The AC70P's actual continuous output power is 1000 W. This is the primary indicator you should use to assess whether the power station is suitable for powering a specific device.

2000 W Power Lifting mode is intended for certain higher-power resistive loads, such as electric heaters, hair dryers, and electric kettles. It does not turn the power station into a device with 2000 W of continuous output power.

For motors, pumps, compressors, and other devices with high starting current, you must check both the device's nominal power and its starting power.

Expandable battery

The AC70P also supports the use of BLUETTI expansion batteries. The manufacturer identifies B80P (806 Wh), B230 (2048 Wh), and B300 (3072 Wh) as compatible models.

This provides the option to extend the power station's runtime later without needing to replace the entire base unit with a larger model.

In the box

According to the official BLUETTI package contents, the AC70P comes with:

• BLUETTI AC70P power station
• AC charging cable
• car charging cable
• solar panel charging cable
• user manual
• warranty documents

We also recommend

Suitable accessories for the AC70P include BLUETTI solar panels, PV charging cables, car charging accessories, and compatible expansion batteries. When choosing solar panels, ensure they remain within the AC70P's input limits of 12–58 V DC, up to 10 A, and up to 500 W.

Not sure if the BLUETTI AC70P 1000 W / 864 Wh can power your desired devices or which solar panel is right for it? Write or call us – we will help you calculate the necessary power and select a suitable solution.