BLUETTI portable power station 600W 320Wh LiFePO4

The BLUETTI Premium 30 V2 is a lightweight and compact portable power station, suitable for camping, car trips, summer cottages, work, travel, and as home backup power. Weighing only about 4.3 kg, the power station stores 320 Wh of energy, and its pure sine wave inverter provides up to 600 W of continuous output power.

Despite its small dimensions, the Premium 30 V2 has a total of 8 outputs, which can be used to power and charge various devices simultaneously. It is well-suited for, for example, phones, laptops, routers, lighting, cameras, drones, and other smaller electrical devices.

In Power Lifting mode, certain resistive devices with a power rating of up to 1500 W can be used. This does not, however, mean 1500 W of continuous output power – the power station's nominal power rating is 600 W.

Technical specifications

• Manufacturer: BLUETTI
• Model: Premium 30 V2
• Product type: portable power station
• Battery capacity: 320 Wh / 20 Ah
• Battery type: LiFePO₄ (LFP)
• Battery lifespan: over 3000 charging cycles to 80% of original capacity
• Continuous AC output power: 600 W
• Power Lifting mode: up to 1500 W
• Inverter: pure sine wave
• Number of outputs: 8
• UPS function: yes
• UPS switching time: ≤10 ms
• Bypass power: up to 980 W
• AC charging power: up to 380 W
• Solar panel input: up to 200 W
• App control: yes
• Connectivity: Wi-Fi / Bluetooth
• Standby power consumption: about 4.5 W
• Noise level: below 30 dB
• Dimensions: 250 × 178 × 167.5 mm
• Weight: about 4.3 kg
• Charging temperature: 0...+40 °C
• Discharging temperature: –20...+40 °C
• Operating humidity: 10–90%

Compact – only 4.3 kg

One of the biggest advantages of the Premium 30 V2 is its light weight and compactness. With a 320 Wh battery and 600 W inverter, the device weighs only about 4.3 kg and measures 250 × 178 × 167.5 mm.

This makes it convenient to keep in a car or take along for camping, to a cottage, or for outdoor work. It is a good choice for situations where you don't need the capacity of a large 1–2 kWh power station and mobility is more important.

600 W pure sine wave inverter

The power station's 600 W continuous AC output power is suitable for powering many smaller 230 V devices. The pure sine wave inverter allows the use of more sensitive electronics as well.

Suitable examples include:

• laptops
• phone chargers
• internet routers
• televisions
• LED lights
• cameras
• drone chargers
• smaller cool boxes
• low-power electrical appliances

The total continuous consumption of connected 230 V devices must remain within the 600 W limit during normal use.

Power Lifting up to 1500 W

The Premium 30 V2 supports Power Lifting mode up to 1500 W. BLUETTI suggests using this for higher-resistance loads, such as certain kettles and small electric ovens.

Important: 1500 W Power Lifting does not mean that the power station's continuous output power is 1500 W. The standard continuous nominal power is 600 W.

For motors, pumps, compressors, and other devices with a high starting current, you must check their starting power separately.

Fast charging

The Premium 30 V2 can be charged from a standard 230 V socket, and the AC charging power is up to 380 W. According to BLUETTI data, when charging from the mains, the battery reaches 80% in approximately 50 minutes.

The power station can be charged via:

• 230 V mains
• solar panels
• 12/24 V car system
• a compatible BLUETTI Charger 1

Up to 200 W solar panel

The Premium 30 V2 supports up to 200 W solar charging. BLUETTI notes a charging time of approximately 2.2 hours with a 200 W solar panel under optimal conditions.

This makes the power station a good solution for camping or summer cottages, for example, where it can be recharged using solar energy during the day.

When choosing a solar panel, always check not only its power but also its voltage and current to ensure they match the power station's PV input.

LiFePO₄ battery – over 3000 charging cycles

The Premium 30 V2 uses a LiFePO₄ or lithium iron phosphate battery. BLUETTI notes an battery lifespan of over 3000 charging cycles to 80% of original capacity and an estimated service life of up to 10 years.

BLUETTI UltraCell™ technology helps reduce the power station's own energy consumption. According to the manufacturer, the standby consumption is about 4.5 W.

UPS backup power ≤10 ms

The Premium 30 V2 can also be used as a UPS backup power source. In the event of a power outage, the switch to battery power occurs in up to 10 milliseconds. In bypass mode, the device supports up to 980 W of power.

This makes the power station practical for, for example:

• internet router backup
• computer and monitor use
• security and communication devices
• home automation
• LED lighting
• keeping other small devices running during power outages

How long does the 320 Wh battery last?

The actual runtime depends on the device's consumption, inverter losses, temperature, and the power station's own energy consumption. Therefore, the entire 320 Wh nominal capacity is not usable from the 230 V output without losses.

As a practical guide, you can consider that a 10 W LED light might run for over 20 hours, a 50 W device for about 5 hours, a 100 W device for about 2.5 hours, and a 300 W device for less than one hour.

These are approximate calculated examples, not runtime guaranteed by the manufacturer.

Suitable for, for example

• home backup power
• power outages
• in a car
• at a cottage
• hiking and camping
• caravans
• job sites
• charging phones and tablets
• charging laptops
• router backup
• LED lighting
• charging cameras and drones
• powering smaller 230 V devices
• off-grid use with a solar panel

Small, lightweight, and quiet

The Premium 30 V2 operates very quietly under low loads. BLUETTI notes the noise level is below 30 dB, and the device weighs only 4.3 kg.

For this reason, it is a particularly good option in the BLUETTI range for a customer who does not need a large 1–2 kWh power station but wants a light and easily portable backup power source.

We also recommend

Compatible with the Premium 30 V2 are BLUETTI solar panels, PV charging cables, car charging accessories, and other portable power station accessories.

The Premium 30 V2 does not support standard capacity expansion with an external battery. A BLUETTI B80 can be used in Power Bank mode to charge the device, but not as an integrated expansion battery.

Not sure if the BLUETTI Premium 30 V2 600 W / 320 Wh can power your devices or which solar panel is suitable for it? Write or call us – we will help calculate the necessary power and choose the right solution.