BLUETTI Portable Power Station 2400W 2304Wh LiFePO4

The BLUETTI AC200PL is a portable power station with high capacity and power output, suitable for home backup, summer cottages, camper vans, work sites, and as part of an off-grid power solution. The device's 2304 Wh LiFePO₄ battery and 2400 W pure sine wave inverter allow you to power not just small electronics, but also significantly higher-wattage household appliances and electrical tools.

The AC200PL's Power Lifting mode allows you to power devices of up to 3600 W for certain resistive loads. The inverter's momentary surge capacity is up to 7200 W. Power Lifting, however, does not mean a continuous output of 3600 W – the rated power of the device is 2400 W.

The power station can be charged from a 230 V power grid, solar panels, a car, a generator, or a lead-acid battery. With up to 2400 W AC fast charging, the battery reaches approximately 80% charge in one hour, and takes about 1.5 hours to fully charge.

Technical specifications

• Manufacturer: BLUETTI
• Model: AC200PL
• Lemona stock code: 440621
• EAN / GTIN: 6970991294754
• Product type: portable power station
• Battery capacity: 2304 Wh / 45 Ah
• Battery type: LiFePO₄ (LFP)
• Continuous AC output power: 2400 W
• Power Lifting mode: up to 3600 W
• Momentary surge power: up to 7200 W
• Inverter: pure sine wave
• Battery life: 3000+ charge cycles to 80% original capacity
• Battery management: BMS
• Solar charge controller: MPPT
• Pass-through charging: yes
• App control: yes
• Dimensions: 420 × 280 × 366.5 mm
• Weight: approx. 28.8 kg
• Discharge temperature: –20...+40 °C
• Charging temperature: 0...+40 °C
• Warranty: 5 years

Outputs

The AC200PL is equipped with multiple AC, USB, and DC outputs, allowing you to power different types of devices simultaneously.

• 4 × 230 V AC sockets
• Total AC output power: up to 2400 W
• 2 × USB-C, up to 100 W
• 2 × USB-A, up to 18 W per port
• 1 × 12 V / 10 A car socket output
• 1 × 48 V / 8 A RV output
• 2 × 15 W wireless charging pads
• AC output: pure sine wave

This means that with the AC200PL, you can simultaneously charge phones and laptops while using 230 V electrical appliances.

Fast charging

One of the AC200PL's greatest strengths is its high charging power. The AC input supports up to 2400 W, which allows the 2304 Wh battery to be ready for use again very quickly.

• AC charging: up to 2400 W
• 0–80%: approx. 1 hour
• 0–100%: approx. 1.5 hours
• Solar charging: up to 1200 W
• Car charging: 12/24 V
• Generator charging: yes
• Lead-acid battery charging: yes

Up to 1200 W solar panels

The built-in MPPT controller allows you to connect up to 1200 W of solar panels to the AC200PL. The PV input operating range is 12–145 V DC, up to 15 A. Under ideal conditions, BLUETTI states a charging time of about 2.5 hours with 1200 W solar panels.

This makes the AC200PL a great solution for a summer cottage or camper van, where you want to regularly charge the power station with solar energy.

NB! When connecting solar panels, you must check the voltage and current of the entire panel array, not just the total wattage of the panels.

Expandable battery

The AC200PL's battery capacity can be increased with BLUETTI expansion batteries. According to Lemona product information, it is compatible with B210P, B230, and B300 expansion batteries, and the total system capacity can be increased to approximately 8 kWh.

This is a significant advantage if you intend to use the power station later for a larger home backup system or a long-term off-grid power solution.

LiFePO₄ battery

The AC200PL uses a LiFePO₄ (lithium iron phosphate) battery, for which BLUETTI specifies at least 3000 charge cycles to 80% original capacity.

LiFePO₄ technology is well-suited for power stations that are used regularly and expected to have a long service life.

Suitable for

• home backup during power outages
• summer cottages and rural homes
• camper vans and caravans
• off-grid power supply
• solar energy systems
• work sites
• using power tools
• backup for refrigerators and freezers
• powering TVs and home electronics
• backup for computers and network devices
• powering lighting
• charging phones, tablets, and laptops
• camping and outdoor use

How long does a 2304 Wh battery last?

Actual run time depends on load, inverter efficiency, temperature, and other conditions. You cannot use the full 2304 Wh nominal capacity from the 230 V output without some losses.

For example, as a general rule of thumb, a device with an average consumption of 100 W could run for nearly 18–20 hours, a 500 W load for about 3.5–4 hours, a 1000 W load for about 1.8–2 hours, and a 2000 W load for approximately 50 minutes. These are calculated estimates, not manufacturer-guaranteed run times.

2400 W, 3600 W, and 7200 W – what is the difference?

It is important not to confuse these three figures. 2400 W is the actual continuous rated power of the power station. 3600 W Power Lifting is designed for certain higher-wattage resistive loads, such as heating devices. 7200 W is the inverter's momentary surge power.

For motors, pumps, compressors, and power tools with high starting currents, you must always check the device's starting power separately.

Important advantage – 48 V RV output

In addition to the standard 12 V car socket, the AC200PL has a 48 V / 8 A RV output. BLUETTI offers a separate D40 DC-DC solution for this, which allows you to integrate the power station into a camper van's electrical system. The D40 is sold separately.

We also recommend

Suitable accessories for the AC200PL include solar panels, PV connection cables, car charging accessories, and BLUETTI expansion batteries. When choosing solar panels, you must adhere to the AC200PL input limits of 12–145 V DC, up to 15 A, and up to 1200 W.

Not sure if the BLUETTI AC200PL 2400 W / 2304 Wh can power your devices or which solar panels are compatible? Write to us or call us – we will help you calculate the necessary power and choose the right solution.